KC-R (ROTARY TABLE)
Vertical Injection Molding Machine - KC series
Features
- Vertical mold clamp and horizontal injection. No-post design is open on three sides and suitable for medium-size injected products with inclusions.
- Injection base can be raised and lowered, and adjusted in or out for quick handling of the molds.
- C-shaped structure and one-step operation minimize the possibility of deformation from high pressure.
- Direct-pressure mold clamp plus twin-cylinder injection system for high precision and long life.
- Meets all requirements for inclusion molding, and a platen or rotary plate may be used to achieve maximum efficiency.
End Products
Specifications
Select Category
| Machine Type | Unit |
| Screw Diameter | mm |
| Injection Pressure | kg/cm2 |
| Theoretical Shot Volume | cm3 |
| Max. Shot Weight(PS) | g |
| oz | |
| Injection Rate | cm3/sec |
| Screw Stroke | mm |
| Screw Speed Max. | rpm |
| Nozzle Contact Force | tons |
| Nozzle Retraction Stroke | mm |
| Number of Temperature Control | - |
| Material Hopper Capacity | | |
| KC-350-D(DM) | KC-450-D(DM) | KC-R-350 | KC-R-450 | ||||||||
| 32 | 38 | 42 | 38 | 42 | 45 | 32 | 38 | 42 | 38 | 42 | 45 |
| 2050 | 1454 | 1190 | 1745 | 1429 | 1244 | 2050 | 1454 | 1190 | 1745 | 1429 | 1244 |
| 113 | 158 | 194 | 191 | 233 | 267 | 113 | 158 | 194 | 191 | 233 | 267 |
| 103 | 144 | 177 | 173 | 212 | 243 | 103 | 144 | 177 | 173 | 212 | 243 |
| 3.6 | 5.1 | 6.2 | 6.1 | 7.5 | 8.6 | 3.6 | 5.1 | 6.2 | 6.1 | 7.5 | 8.6 |
| 48 | 68 | 83 | 87 | 106 | 122 | 48 | 68 | 83 | 87 | 106 | 122 |
| 140 | 168 | 140 | 168 | ||||||||
| 0-175 | 0-160 | 0-175 | 0-160 | ||||||||
| 3.9 | 3.9 | 3.9 | 3.9 | ||||||||
| 130 | 150 | 130 | 150 | ||||||||
| 3 | 4 | 3 | 4 | ||||||||
| 25 | 50 | 25 | 50 | ||||||||
| Machine Type | Unit |
| Clamping Force | tons |
| Opening Force | tons |
| Platen Size | mm |
| Distance Between Tie Bare | mm |
| Min. Mold Height | mm |
| Opening Stroke | mm |
| Max. Open Daylight | mm |
| Ejector Force | tons |
| Ejector Stroke | mm |
| KC-350-D(DM) | KC-450-D(DM) | KC-R-350 | KC-R-450 |
| 45 | 85 | 45 | 85 |
| 8.3 | 13 | 8.3 | 13 |
| 420x270 | 460x330 | 420x270 | 460x330 |
| - | - | Ø860 | Ø1168 |
| 175 | 210 | 175 | 210 |
| 200 | 270 | 200 | 270 |
| 375 | 480 | 375 | 480 |
| 1.3 | 2.5 | 1.3 | 2.5 |
| 75 | 80 | 75 | 80 |
| Machine Type | Unit |
| Slide Stroke | mm |
| Rotary Station | - |
| Max. Mold Weight | kg |
| Station Accuracy | mm |
| KC-350-D(DM) | KC-450-D(DM) | KC-R-350 | KC-R-450 |
| 270/480 | 320/500 | - | - |
| - | - | 2-4 | 2-4 |
| 120 | 150 | 200x2/120x4 | 300x2/200x4 |
| ±0.02 | ±0.02 | ±0.02 | ±0.02 |
| Machine Type | Unit |
| Max. Hydraulic Pressure | kg/cm2 |
| Pump Output | liters/min |
| Oil Reservoir Capacity | liters |
| Cooling Water Consumption | liters/hr |
| Pump Motor Power | kw |
| Barrel Heating Power | kw |
| Total Wattage | kw |
| KC-350-D(DM) | KC-450-D(DM) | KC-R-350 | KC-R-450 |
| 140 | 140 | 140 | 140 |
| 43 | 65 | 43-10 | 65-12 |
| 200 | 300 | 200 | 300 |
| 800-1000 | 1000-1200 | 800-1000 | 1000-1200 |
| 7.5 | 11 | 11 | 14.7 |
| 5.5 | 7.5 | 5.5 | 7.5 |
| 13 | 18.5 | 16.5 | 22.2 |
| Machine Type | Unit |
| Machine Weight | tons |
| Machine Dimensions(L x W x H) | m |
| Shipping Weight | tons |
| Shipping Measurements(L x W x H) | m |
| KC-350-D(DM) | KC-450-D(DM) | KC-R-350 | KC-R-450 |
| 3.1/3.5 | 5.8/6.5 | 3.8 | 7.2 |
| 2.8x1.05x2.05 | 3.3x1.15x2.65 | 3.5x1.65x2.15 | 3.9x1.8x2.7 |
| 3.5/4.3 | 6.5/7.2 | 4.6 | 8 |
| 3.0x1.25x2.25 | 3.5x1.35x2.5 | 3.8x1.85x2.4 | 4.1x2x2.5 |